Siemens SIMATIC Ident - Page 80

Setting parameters for blocks
3.5 Programming the Ident profile
Ident profile and Ident blocks, standard function for Ident systems
80 Function Manual, 10/2018, C79000-G8976-C387-04
Parameter
Data type
Default val-
ue
Description
EXT_UHF STRUCT -- Structure for additional parameters (RF61xR/RF68xR
only)
LEN_ID
BYTE
B#16#0
Length of the valid data in the "EPCID_UID" field.
MEM_BANK BYTE B#16#3 Memory bank on the transponder
• 0x00 = RESERVED
• 0x01 = EPC
• 0x02 = TID
• 0x03 = USER
PSWD DWORD DW#16#0 Password for transponder access
0x00 ≙ no password
EDIT_BLACKLIST_MODE BYTE B#16#0 Mode
• 0x00 = add TagID
• 0x01 = add all "Observed" transponders
• 0x02 = delete TagID
• 0x03 = delete all
INVENTORY_DURATION WORD W#16#0 Duration
Period of time or number of inventories or number of
"Observed" events
Example:
• 0x00 ≙ no inventory
• 0x01 ≙ one inventory
INVENTORY_DUR_UNIT WORD W#16#0 Unit for "DURATION"
• 0x00 = time [ms]
• 0x01 = inventories
• 0x02 = Number of transponders that reach the "Ob-
served" state
LOCK-TAG-
BANK_ACTION
WORD W#16#0 Lock-Action (see "EPC Specification")
LOCK-TAG-BANK_MASK
WORD
W#16#0
Lock-Mask (see "EPC Specification")