Siemens SIMATIC IPC BX-56A User Manual

Configuring firmware
3.4 "Advanced" tab
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
14 Operating Instructions, 10/2023, A5E52427534-AA
3.4.5 "Active Management Technology Configuration"
Configure remote management.
This configuration is only available for SIMATIC IPC BX-59A.
Calling "Active Management Technology Configuration"
Select: "Setup Utility (Page 10)" > "Advanced" > "Active Management Technology
Configuration".
Firmware setting Value Setting in
delivery state
Meaning
BX-59A
AMT BIOS
Features
Enable
x
Enable AMT (Active Management Technology) BIOS Features.
Disable
Disable AMT BIOS Features. When disabled, you cannot access to
MEBx setup anymore.
AMT Configuration
USB Provisioning
of AMT
Enable
Enable AMT USB Provisioning.
Disable
x
Disable AMT USB Provisioning.
Unconfigure ME
When selected, you can reset all MEBx values to default values.
3.4.6 "Hardware Monitor"
Calling "Hardware Monitor"
Select: "Setup Utility (Page 10)" > "Advanced" > "Hardware Monitor".
Firmware setting
Value
Voltage
+1.8V
[Voltage value]
+3.3V
[Voltage value]
RTC
[Voltage value]
+1.05V
[Voltage value]
Temperature
CPU Temperature
[Temperature value]
System Temperature
[Temperature value]
Fan Speed
FAN1
[Rotate speed]
FAN2
[Rotate speed]
EM-FAN1
[Rotate speed]
EM-FAN2
[Rotate speed]

Siemens SIMATIC IPC BX-56A Specifications

General

Brand	Siemens
Model	SIMATIC IPC BX-56A
Category	Industrial PC
Language	English