Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
34 Operating Instructions, 10/2023, A5E52427534-AA
Automatic switching on the device
The device always switches on when the supply voltage is applied.
Danger from undesired startup of device after power failure
Automatic startup of the device, for example, after a power failure, can result in undesired
reactions of the machine or system and endanger operation.
During system planning, check whether this automatic startup of your machine or system
poses a safety risk and then change the device behavior appropriately.
To Next Page
Loading...
Need help?
General
