Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Operating Instructions, 10/2023, A5E52427534-AA
35
Configuring AMT function
The AMT function is disabled as the default value.
To configure AMT, open the firmware selection menu (Page 9) and select "MEBx". To learn
more about it, refer to Intel® Active Management Technology
(https://www.intel.com/content/www/us/en/developer/articles/guide/getting-started-with-
active-management-technology.html).
To configure the AMT function, make sure you have enabled the AMT BIOS Feature in Active
Management Technology Configuration in "Advanced" tab. Otherwise, you cannot access to
MEBx.
To Next Page
Loading...
