Siemens SIMATIC IPC BX-56A User Manual

Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Operating Instructions, 10/2023, A5E52427534-AA
3
Important information
Basic knowledge requirements
This firmware / BIOS description is intended for the following qualified personnel:
• Programmers and testers who commission the device themselves and connect it to an
automation system.
• Service and maintenance technicians who install enhancements or conduct fault analysis.
A solid background in personal computers is required to understand this manual. General
knowledge in the field automation control engineering is recommended.
Scope of validity
This firmware/BIOS description applies to the following SIMATIC IPCs:
• SIMATIC IPC BX-56A
• SIMATIC IPC BX-59A
History
The following versions of this firmware/BIOS description have been published previously:
Edition
Comment
10/2023
First Edition
Firmware/BIOS
The firmware (BIOS) is located in a FLASH block on the motherboard.
The firmware selection menu can be opened after the device has been started. You can then
configure the firmware settings of your device.

Siemens SIMATIC IPC BX-56A Specifications

General

Brand	Siemens
Model	SIMATIC IPC BX-56A
Category	Industrial PC
Language	English