Siemens SIMATIC IPC BX-56A - Exit Tab

Configuring firmware
3.8 "Exit" tab
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
30 Operating Instructions, 10/2023, A5E52427534-AA
3.8 "Exit" tab
Exit Setup Utility. You have the following options for saving or discarding the changes you
made:
Calling "Exit"
Choose: "Setup Utility (Page 10)" > "Exit".
Firmware setting
Meaning
Exit Saving Changes
All changes are saved.
The device is restarted with the changed firmware settings.
Save Change Without Exit
All changes are saved.
Setup utility remains open.
Exit Discarding Changes
Setup Utility is closed.
All changes are discarded.
Load Optimal Defaults
The firmware settings are reset to the safe default values.
The delivery state is restored.
NOTICE:
All current firmware settings are overwritten.
Load Custom Defaults
The user-specific profile with the user-specific firmware settings is loaded.
Requirement:
The firmware settings were previously saved as user-specific profile with "Save
Custom Defaults".
NOTICE:
All current firmware settings are overwritten when loading the user-specific profile
with "Load Custom Defaults".
Save Custom Defaults
The current firmware settings are saved as a user-specific profile (see also "Load
Custom Defaults").
Discard Changes
All changes to the firmware settings are discarded.
Save setup settings to file
The current firmware settings are written to a file.
Load setup settings from file
Firmware settings are loaded from a file.