Siemens SIMATIC IPC BX-56A - Page 22

Configuring firmware
3.4 "Advanced" tab
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
22 Operating Instructions, 10/2023, A5E52427534-AA
Firmware
setting
Value Setting in
delivery state
Meaning
PCIe Express
Port Enable
Enabled
x
x
Control the PCI Express Root Port.
Disabled
PCIe Max Link
Speed
Auto
x
Configure PCIe Speed.
NOTICE:
The PCIe max link speed configuration options might be different
according to different Extension Module you are using. The
display menu is subject to the actual using case.
Gen1
Gen2
Gen3
x
Gen4
Detect Timeout
[Number]
0
0
The number of milliseconds reference code will wait for link to
exit. Detect state for enabled ports before assuming there is no
device and potentially disabling the port.
The input range is from 0 to 65535.
PCI Express Slot (X303)
NOTICE: PEC Express Slot (X303) is unavailable for IPC BX-56A.
PCIE (BUS:xx
Device:xx
Function:xx)
Present/Not
Presented
The PCIE bus device function is present or not.
PCIe Express
Port Enable
Enabled
x
Control the PCI Express Root Port.
Disabled
PCIe Max Link
Speed
Auto
x
Configure PCIe Speed.
NOTICE:
The PCIe max link speed configuration options might be different
according to different Extension Module you are using. The
display menu is subject to the actual using case.
Gen1
Gen2
Gen3
Gen4
Detect Timeout
[Number]
0
The number of milliseconds reference code will wait for link to
exit. Detect state for enabled ports before assuming there is no
device and potentially disabling the port.
The input range is from 0 to 65535.
PCI Express Slot (X304)
NOTICE: PEC Express Slot (X304) is unavailable for IPC BX-56A.
PCIE (BUS:xx
Device:xx
Function:xx)
Present/Not
Presented
The PCIE bus device function is present or not.
PCIe Express
Port Enable
Enabled
x
Control the PCI Express Root Port.
Disabled
PCIe Express
Port Enable
Auto
Configure PCIe Speed.
NOTICE:
The PCIe max link speed configuration options might be different
according to different Extension Module you are using. The
display menu is subject to the actual using case.
Gen1
Gen2
Gen3
x
Gen4
Detect Timeout
[Number]
0
The number of milliseconds reference code will wait for link to
exit. Detect state for enabled ports before assuming there is no
device and potentially disabling the port.
The input range is from 0 to 65535.
Serial ATA Port
(X54)
[Empty]/[Drive
name]
Software
Preserve
SUPPORTED/Unk
nown