Siemens SIMATIC IPC327G User Manual

Technical specifications
8.4 Technical data
SIMATIC IPC377G
Operating Instructions, 07/2022, A5E51366314-AB
75
DisplayPort
• Connection of a digital monitor, support DisplayPort Standard Version 1.4
• 2 × DP++ 2, support resolution up to 4096 × 2160 pixels at 60 Hz
Keyboard, mouse
Connection via USB port
Audio
Connection for analog audio source and speaker (optional)
1
In BIOS Setup, you can configure support for RS232/RS422/RS485 for COM1 and COM2 ports.
8.4.2 Ambient conditions
Climatic ambient conditions
For permitted mounting positions, see section Preparing for installation (Page 19).
Temperature, tested in accordance with IEC 60068-2-1, IEC 60068-2-2 and IEC 60068-2-14
12“, 15“
At an ambient temperature > 40 °C, the device must be operated in an operating area
in accordance with RAL.
When installed vertically in
horizontal format
• 0 °C to +50 °C
When installed inclined in
horizontal format,
vertical inclination maximum
±45 °
When installed upright in
vertical format,
(Power supply is located at
the top)
19“, 22“
At an ambient temperature > 40 °C, the device must be operated in an operating area
in accordance with RAL.
When installed vertically in
horizontal format
• 0 °C to +45 °C
When installed inclined in
horizontal format,
vertical inclination maximum
±45 °
When installed upright in
vertical format,
(Power supply is located at
the top)
Temperature during storage/transport
-20 °C to +70 °C
Gradient
• Operation: Max. 10 °C/h
• Storage: 20 °C/h, no condensation
Relative humidity, tested in accordance with IEC 60068-2-78, IEC 60068-2-30
Operation
Up to 85%, no condensation
Gradient ≤ 10℃/h
Storage/transport Up to 95% at 25/55 °C, no condensation
Gradient ≤ 20℃/h
Atmospheric pressure

Siemens SIMATIC IPC327G Specifications

General

Brand	Siemens
Model	SIMATIC IPC327G
Category	Industrial PC
Language	English