Siemens SIMATIC IPC427C - Page 133

Detailed descriptions
16.2 BIOS Setup
SIMATIC IPC427C
Operating Instructions, 04/2009, A5E02414743-01
133
Hardware Options
On-board Ethernet 2 Enabled
Ethernet 2 Address 00.0E.8C.xxxxxx
Ethernet 2 Remote Boot Disabled
Dual view DVI/CRT Disabled
1)
Only for models with PROFIBUS
2)
Only with models with CAN bus
Advanced
HPET - HPET support Enabled
Legacy USB support Enabled
SafeCard functions Enabled
IO device configuration
Internal COM 1 Auto
Internal COM 2 Auto
SATA Configuration
SATA Controller Enabled
SATA Controller mode Enhanced
Security
Supervisor Password Not installed
User password Not installed
Set Supervisor Password
Power on password
User Access Level
Set User Password
Boot
Legacy Boot Devices
EFI Boot Devices
Legacy Boot Type Order
Boot menu Standard