Siemens SIMATIC IPC427C - Unpacking and Checking the Delivery Unit

Application planning
4.2 Unpacking and checking the delivery unit
SIMATIC IPC427C
22 Operating Instructions, 04/2009, A5E02414743-01
4.2 Unpacking and checking the delivery unit
Unpacking the device
Note the following when unpacking the unit:
● It is advisable not to dispose of the original packing material. Keep it in case you have to
transport the unit again.
● Please keep the documentation in a safe place. It is required for initial commissioning and
is part of the device.
● Check the delivery unit for any visible transport damage.
● Verify that the shipment contains the complete unit and your separately ordered
accessories. Please inform your local dealer of any disagreements or transport damages.
Noting the device identification data
The device can be identified uniquely with the help of these numbers in case of repairs or
theft.
Enter the data in the following table:
Serial number S VP ...
Order number of the device 6ES 7647-7B ...
Microsoft Windows Product Key
Ethernet address 1
Ethernet address 2
You can find the corresponding data here:
● Serial number: The serial number is available on the rating plate on the right side of the
device.
● Order number of the device: The order number is located on the rating plate.