Siemens SIMATIC IPC427C - Service and Support

Appendix
A.3 Service and support
SIMATIC IPC427C
146 Operating Instructions, 04/2009, A5E02414743-01
A.3 Service and support
Local information
Contain your Siemens representative (http://www.siemens.com/automation/partner) if you
have questions about the products described here.
Technical documentation for SIMATIC products
You can find additional documentation for SIMATIC products and systems in the Internet:
SIMATIC Guide manuals (
http://www.siemens.com/simatic-tech-doku-portal)
Easy shopping at the mall
You can find the online catalog and order system under:
Industrial Automation and Drive Technologies (
http://mall.automation.siemens.com)
Training center
All the training options are listed at:
SITRAIN homepage (
http://www.sitrain.com)
Find a contact at: Tel. + 49 911 895 3200
Technical support
You can contact technical support for all Industry Automation and Drive Technologies
products by:
● Phone: +49 180 5050 222
● Fax: +49 180 5050 223
● Internet: Online support request form: (
http://www.siemens.com/automation/support-
request)
When you contact the customer support, please have the following information for the
technician on hand:
● BIOS version
● Order No. (MLFB) of the device
● Installed additional software
● Installed additional hardware
Online Service & Support
Information about the product, Support and Service, right through to the Technical Forum,
can be found at: Industry Automation and Drive Technologies - Homepage
(
http://www.siemens.com/automation/service&support)
After-sales information system for SIMATIC PC / PG
Information about contacts, drivers, and BIOS updates, FAQs and Customer Support can be
found at: After-sales information system for SIMATIC PC/PG (
http://www.siemens.com/asis)