Installing/mounting
5.4 Mounting on DIN rails
SIMATIC IPC427C
Operating Instructions, 04/2009, A5E02414743-01
29
NOTICE
The rails are secured to a wall or cabinet similar to mounting with mounting brackets.
Ensure that the wall or ceiling can hold four times the total weight of the device (including
the rails and additional expansion modules). Also see section
Mounting with mounting
brackets (Page
30).
Removing the device from the DIN rail
● Push down the device until the clamps release it.
● Swing the device out of the rails.
To Next Page
Loading...
Need help?
General
