Technical specifications
14.1 General specifications
SIMATIC IPC427C
Operating Instructions, 04/2009, A5E02414743-01
93
General specifications
Mech. Ambient conditions
Vibration Tested to DIN IEC 60068-2-6
- Operation with CompactFlash card 5 to 9 Hz: 3.5 mm, 9 to 500 Hz: 9.8 m/s2
with hard disk and wall installation: 10 to 58 Hz: 0.0375 mm; 58 to
200 Hz: 4.9 m/s2
with hard disk and DIN rail mounting or vertical installation: Starting
prohibited
- Storage/transport 5 to 9 Hz: 3.5 mm, 9 to 500 Hz: 9.8 m/s2
Resistance to shock Tested to DIN IEC 60068-2-27
- Operation without hard disk drive: 150 m/s
2
, 11 ms;
with hard disk drive: 50 m/s
2
, 30 ms
- Storage/transport 250 m/s
2
, 6 ms
Special Features
Quality assurance acc. to ISO 9001
Motherboard
Processor Intel Celeron M 1.2 GHz, 1 MB SLC or
Intel Pentium Core 2 Solo 1.2 GHz, 3 MB SLC or
Intel Pentium Core 2 Duo 1.2 GHz, 3 MB SLC
Front Side Bus 800 MHz
Main memory SO-DIMM modules; 512/1024/2048/4096 MB DDR3-SDRAM
Buffer memory 2 MB SRAM (256 KB of this can be backed up in the buffer time of
the power supply under full load)
Free expansion slots Up to 3 PCI-104 or PC/104-
Plus
modules can be used
(max. permitted power loss: 3 W per module, 9 W total)
Drives / storage media
Hard disk 1x 2.5" SATA-HD optional
Solid State Disk 1x 2.5" SATA-SSD optional
Compact Flash card 256/2048/4096/8192 MB
Graphics
Graphics controller Intel GMA4500
Graphics memory 8 - 512 MB Shared Memory
Resolutions/frequencies/color depth CRT: 640 x 480 to 1920 x 1200 / 60 - 120Hz
DVI-LCD: 640 x 480 to 1920 x 1200 / 60Hz
To Next Page
Loading...
