Siemens SIMATIC IPC477D User Manual

Expanding the device and assigning device parameters
6.2 Installing and removing a memory module
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
139
Installation
1.
Insert the memory module into the
marked slot at an incline with the contact
side toward the motherboard.
2.
Carefully press the memory module into
the contact strip until the latches engage.
3.
Re-install the SSD (for 12" touch built-in unit only) and connect the device.

Siemens SIMATIC IPC477D Specifications

General

Brand	Siemens
Model	SIMATIC IPC477D
Category	Industrial PC
Language	English