Siemens SIMATIC IPC477D - Replacing the SSD (Devices with 15, 19 or 22 Display)

Maintaining and servicing your device
7.4 Installing and removing hardware
SIMATIC IPC477D, IPC477D PRO
158 Operating Instructions, 11/2016, A5E31347228-AF
7.4.1.4
Replacing the SSD (devices with 15", 19" or 22" display)
Depending on the version ordered, an SSD may be installed in the touch device with 15",
19", or 22" display and in the touch/key device.
Requirement
● The device is disconnected from the power supply.
● The device is open, see the section "Opening the built-in unit (Page 133)".
● SSD
● T10 screwdriver
Procedure
Removal
1.
Remove the marked screws.
2.
Remove the marked screws.
3.
Remove the connectors from the port.