Siemens SIMATIC IPC477D - Adapter Set for Support Arm and Stand Mounting of PRO Device

Overview
1.7 System components for PRO devices
SIMATIC IPC477D, IPC477D PRO
36 Operating Instructions, 11/2016, A5E31347228-AF
1.7.2
Adapter set for support arm and stand mounting of PRO device
The PRO device can be mounted on systems from third-party vendors (see section
"Mounting the PRO device (Page 68)").
For this you will need the Siemens base adapter (see Base adapter (Page 35)) and a
proprietary adapter set.
Siemens also offers its own adapter for VESA-compatible third-party systems:
Adapter set
Suitable for support arm systems
Article number
SIEMENS:
• Adapter set VESA75
• Adapter set VESA100
• VESA75-compatible systems
• VESA100-compatible systems
• 6AV7674-0KE00-0AA0
• 6AV7674-0KD00-0AA0
RITTAL:
Adapter for Siemens PRO
Panel
• Intermediate plate
• Screws
• CP40 steel
• CP60/120 for
Support arm connection
120 × 65 mm
6206.500
ROLEC:
Adapter for Siemens PRO
Panel
• Intermediate plate
• Screws
• profiPlus-50
• taraPLUS for ∅ 65 mm hole
circle
142.024.000
BERNSTEIN:
Coupling for Siemens
SIMATIC PRO
• No intermediate plate re-
quired
• Coupling with integrated
adaptation for PRO device
• CS-3000 • 1015300187 RAL 9006
white aluminum
• 1015300043 RAL 7016
anthracite gray
Information provided without guarantee.