Mounting and connecting the device
3.3 Mounting the PRO device
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
73
1. If an adapter plate for the Siemens base adapter is included in your support arm system,
attach the adapter plate to the support arm with 4 M6x12 screws. Pay attention to the
torque that is specified for the support arm.
2. Attach the base adapter with 4 M6x12 screws to the mechanical interface of the support
arm from below. Pay attention to the torque that is specified for the support arm.
Repair information (Page 150)
Accessory kit (Page 32)
To Next Page
Loading...
Need help?
General
