Siemens SIMATIC IPC477D User Manual

Mounting and connecting the device
3.4 Connecting the device
SIMATIC IPC477D, IPC477D PRO
98 Operating Instructions, 11/2016, A5E31347228-AF
Document name
What is contained in this document?
Manual
SIMATIC NET Industrial Communication
with PG/PC: Volume 1 - Basics
SIMATIC NET Industrial Communication
with PG/PC: Volume 2 - Interfaces
This manual introduces you to industrial communica-
tion and explains the available communication proto-
cols. It also describes the OPC interface as an
alternative to the IO-based user programming inter-
face.
S7 CPs for Industrial Ethernet
Configuring and Commissioning
This provides the following support:
- For commissioning S7 stations
- For establishing effective communication
Manual
SIMATIC NET - Twisted Pair and Fiber-
Optic Networks
Configure and build your Industrial Ethernet networks
based on this document.
This documentation is part of the supplied Documentation and Drivers CD:
Operating instructions
CP 1616/CP 1604/CP 1616 onboard
This provides you with all information required for
operation.
Installation guide
Device Driver CP16xx.sys
Read this guide if you want to install the NDIS device
driver, CP16xx.sys.
Further information
You can find the information on specific products in the Internet at the address: Product-
related Information SIMATIC NET (http://www.siemens.com/simatic-net)

Siemens SIMATIC IPC477D Specifications

General

Brand	Siemens
Model	SIMATIC IPC477D
Category	Industrial PC
Language	English