SIMATIC Rack PC 547B
Operating Instructions, 12/2007, A5E01127519-02
27
Mounting
5
5.1 Installing the device
Optional mounting locations
The device can be mounted in control desks, switching cabinets and 19" rack systems, both
horizontally and vertically.
Optional mounting methods
The device can be mounted with the following methods
● Mounting with cabinet brackets
● Mounting on device bases
● Tower installation: a separate tower kit can be ordered for tower installation (not available
in some countries).
● Mounting on telescopic rails
These telescopic rails allow you to fully extract the device out of the cabinet or rack.
Refer to the sections "Technical data of the telescopic rails" and "Dimensional drawing for
the use of telescopic rails" for more detailed information.
Position of the mounting holes (1) for angle brackets or telescopic rails
CAUTION
The mounting screws of the telescopic rails may not protrude more than 5 mm into the
enclosure.
To Next Page
Loading...
