Maintenance and service
11.2 Reinstalling the software
SIMATIC Rack PC 547B
76 Operating Instructions, 12/2007, A5E01127519-02
11.2.3 Installing Windows
Use the recovery CD to create a Windows installation that meets your specific requirements.
You also need the included Documentation and Drivers CD. Additional controllers unknown
to the operating system must be made known to the recovery system and to the Windows
operating system.
1. Press the F6 key while booting or the "Load Driver" icon and follow the on-screen
instructions. During the rest of the installation, you will be asked several times for the
missing driver of the controller.
Booting from recovery CD or DVD
1. To boot from the recovery CD or DVD, press the F12 key during the self-test phase. The
boot menu displayed after initialization indicates all boot devices.
2. Select the CD/DVD drive.
Follow the instructions on the screen until the "Siemens SIMATIC Recovery" window is
displayed.
When using the recovery function with Vista, confirm that you want to boot from CD or
DVD as soon as you restart. Otherwise the system boots from hard disk if you have a
bootable hard disk installed.
The following sections describe older Windows operating systems. Recovery for Vista is
described as of section 11.2.6.
To Next Page
Loading...
