Siemens SIMATIC Rack PC 547B - Installing Drivers and Software; Installing the RAID Controller Software; Installing Burner;DVD Software

Maintenance and service
11.2 Reinstalling the software
SIMATIC Rack PC 547B
Operating Instructions, 12/2007, A5E01127519-02
85
11.2.7 Installing drivers and software
NOTICE
Before you install new drivers or updates for multilingual operating systems, (MUI versions),
reset the regional settings for menus and dialogs and the default language to US English.
Install the drivers and software from the included "Documentation and Drivers" CD.
Procedure:
1. Place the CD into the drive.
2. Run
START .
3. Select
Drivers & Updates from the index.
4. Select the operating system in
Drivers & Updates .
5. Install the required driver.
NOTICE
If you require the driver for the chipset after reinstalling Windows 2000 / XP / Server 2003 /
Vista, this must always be installed first before all other drivers.
11.2.8 Installing the RAID Controller software
The procedure for installing the software can be found in the user manual on the supplied
"Documentation and Drivers" CD in the directory Drivers\RAID\Intel.
Note on Windows 2000 Professional / XP Professional / Windows Server 2003 / Vista
Select the Intel(R) 82801GR/GH SATA RAID Controller from the proposed list when you
install a Windows operating system. To display the list completely, you may need to scroll
down with the arrow keys.
11.2.9 Installing burner/DVD software
Information about installation of the burner / DVD software is available on the supplied CD.