Siemens SIMATIC Rack PC 547B - Page 84

Maintenance and service
11.2 Reinstalling the software
SIMATIC Rack PC 547B
84 Operating Instructions, 12/2007, A5E01127519-02
When shipped, the partitions are set up as follows:
Partition Operating system Name Size File system
First Windows Vista System 25 GB NTFS not compressed
Second Windows Vista DATA Remainder NTFS not compressed
Following a reboot, Windows Vista is installed on the hard disk. This process takes at least
20 minutes.
Now follow the instructions on the screen.
Note
If you want to reinstall drivers from the integrated floppy disk drive, select Floppy Drive (A:).
If you want to reinstall drivers from a USB floppy disk drive, select Floppy Drive (B:) .
Note
If you want to use Microsoft Windows as a professional user, you should have the following
manual available (not supplied):
Windows Vista Resource Kit
This manual contains specific information for administrators who install, manage and
integrate Windows in networks or multi-user environments.
Setting up language options in Windows Vista
With the Multilanguage User Interface (MUI), you can set up the Windows menus and
dialogs for additional languages. When shipped, Windows Vista is installed with English
menus and dialogs. You can change this in the Control Panel with the "Regional and
Language options" or "Time and Date" dialogs.
Here, you can change all system formats:
Start > Control Panel > Clock, Language, and Region > Change display language >
Regional and Language options
Here, you can only change the date and time formats:
Start > Control Panel > Clock, Language, and Region > Change display language > Time
and Date
If you want to install additional languages, you can install these later in the Control Panel, as
follows. You will find the necessary files on the recovery DVD in the "Languagepacks" folder.
Start > Control Panel > Clock, Language, and Region > Change display language >
Regional and Language options > Keyboards and Languages