Siemens SIMATIC RF600 Series User Manual

Antennas
6.7 SIMATIC RF660A
SIMATIC RF600
302 System Manual, 11/2018, J31069-D0171-U001-A21-7618
Cable designa-
tion
Article number
Length [m]
Cable loss [dB]
Bending radius
[mm]
1)
Antenna cable
(suitable for drag
chains)
6GT2815-2BN15 15 4 44
2)
Antenna cable 6GT2815-0BN20 20 4 77
Antenna cable
6GT2815-0BN40
40
5
77
1)
Permissible minimum bending radius with multiple bending.
2)
With cables capable of being used in drag chains, 100,000 bending cycles at a bending radius of
100 mm and a bend of ± 180° or 3 million torsion cycles with a bend of ± 180° on a cable length of
1 m are permitted.
6.7.5 Antenna parameter assignment
Depending on the country or region in which the antenna is being operated, it is subject to
regional limitations with respect to the radiated power.
Limitations in the EU, EFTA, or Turkey
Note
Limitation of the radiated power according to EN 302 208 V1.4.1 (ETSI)
RF600
systems that are put into operation in the EU, EFTA or Turkey must not exceed the
following radiated power with an RF660A antenna:
•
2000 mW ERP (or 33 dBm ERP)
Converted into EIRP: 3250 mW EIRP (or 35 dBm EIRP)
Make the following settings to ensure that the maximum permitted radiated power of the
antenna is not exceeded:
● Antenna gain: 7 dBi (10 dBic)
● Radiated power: ≤ 2000 mW ERP (or 33 dBm ERP)
Converted into EIRP: ≤ 3250 mW EIRP (or 35 dBm EIRP)
● Use of cable loss associated with the antenna cable.

Siemens SIMATIC RF600 Series Specifications

General

Brand	Siemens
Model	SIMATIC RF600 Series
Category	Rfid Systems
Language	English