Siemens Simatic S7-1500 CPU 1512C-1 PN User Manual

Product overview
2.3 Operator controls and display elements
CPU 1512C-1 PN (6ES7512-1CK01-0AB0)
38 Manual, 12/2017, A5E40898741-AA
2.3.2
Front view of the CPU without front panel and view from below
The following figure shows the operator control and connection elements of the
CPU 1512C-1 PN with the front cover of the CPU open.
①
LEDs for the current operating mode and diagnostics status of the CPU
②
Status and error displays RUN/ERROR of the analog on-board I/O
③
Status and error displays RUN/ERROR of the digital on-board I/O
④
Connector for power supply
⑤
Operating modes with "STOP ACTIVE" LED
⑥
LEDs for the 2 ports (X1 P1 and X1 P2) of the PROFINET interface X1
⑦
MAC address
⑧
Display
Figure 2-6 View of the CPU 1512C-1 PN without front panel on the CPU (front)

Siemens Simatic S7-1500 CPU 1512C-1 PN Specifications

General

Integrated Interfaces	PROFINET
Data Memory	1 MB
Number of Signal Boards	1
Firmware Version	V2.8
Rated Value (DC)	24 V
Number of PROFINET Ports	2
Number of PROFINET Ports with Switch	2
Integrated Web Server	Yes
Number of Digital Inputs	16
Number of Digital Outputs	16
Number of Analog Outputs	2
Number of High-speed Counters	6
Program Memory	300 KB
Number of Signal Modules	32
Engineering with	STEP 7 Professional V13
Interface Type	Ethernet
Data Storage	Yes
Operating Temperature	0 to 60 °C
Dimensions	147 mm x 129 mm