Siemens SIMATIC S7-300 Module data Product Information

Expert Functions
5.6 Measuring Function
Connection of the SINAMICS S120 to the Technology CPU
Product Information, 09/2011, A5E00480378-04
163
Transferring the configuration to the Technology CPU
The Technology CPU configuration has been changed as a result of inserting the
TM17 terminal module and aligning with HW Config.
To transfer the modified configuration to the Technology CPU, follow these steps:
1. Open HW Config.
2. Perform a download.
3. To check the Drive CLiQ connection, switch to the S120_CU320 > Topology
folder in the S7T Config project navigator.
4. Compare the Drive CLiQ connection of the parameter assignment with your configuration
and adjust the topology or configuration as appropriate.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)