Siemens Simatic series User Manual

Device maintenance and repair
7.3 Manage onboard RAID system
SIMATIC IPC547G
Operating Instructions, 04/2020, A5E49948632-AA
111
Manual integration of the hard disk (in the event of an error)
1. Select "Start" > "Programs" > "Intel Rapid Storage Technology".
2. Click
"Run Hardware Scan now".
The new hard disk is found and displayed.
Click on the link "Rebuild to another Disk".
Or:
1. Reboot the device.
The RAID software automatically integrates the hard disk.
2. Click on the link "Rebuild to another Disk".
Synchronization of the RAID system is initiated after clicking the link "Rebuild to another
disk".

Siemens Simatic series Specifications

General

Processor	Intel Core i3, Core i5, Core i7
Operating System	Windows 10 IoT Enterprise, Linux
Storage	SSD, HDD
Interfaces	Ethernet, USB, RS-232/485
Ports	Ethernet, USB, Serial
Mounting	DIN rail, wall
Protection Class	IP65
Graphics	Integrated Intel HD Graphics
Expansion Slots	PCIe
Power Supply	24V DC or 100-240V AC
Operating Temperature	0°C to 50°C (depending on model)