Siemens Simatic series User Manual

Technical specifications
8.8 Assignment of expansion interface to the software in the TIA Portal (CP assignment)
SIMATIC IPC547G
170 Operating Instructions, 04/2020, A5E49948632-AA
8.8 Assignment of expansion interface to the software in the TIA Portal
(CP assignment)
The table below shows the correlation between enclosure labeling of the IPC expansion slots
and the labeling that is used during assignment of interfaces to the software in the TIA
Portal.
Enclosure labeling
TIA Portal
1
X100
2
X101
3
X102
4 X103
5
X104
6
X105
7
X106

Siemens Simatic series Specifications

General

Brand	Siemens
Model	Simatic series
Category	Industrial PC
Language	English