Siemens Simatic series User Manual

Device maintenance and repair
7.4 Removing and installing hardware
SIMATIC IPC547G
Operating Instructions, 04/2020, A5E49948632-AA
121
7.4.6 Removing the motherboard
Requirement
● The device is fully disconnected from the mains voltage; see section "Switching off the
device (Page 63)".
● The device is open; see section "Open the device (Page 76)".
● A motherboard
The motherboard as spare part is supplied without processor and memory modules.
● T10 screwdriver
Procedure
Removal
1. Remove the expansion cards from the slots, see chapter "Installing expansion cards
(Page 78)".
2. Push the built-in 5.25" drives or 5.25" adapter for the removable tray to the front; see
section "Drives".
3. Note the assignment of all cables to the motherboard.

Siemens Simatic series Specifications

General

Processor	Intel Core i3, Core i5, Core i7
Operating System	Windows 10 IoT Enterprise, Linux
Storage	SSD, HDD
Interfaces	Ethernet, USB, RS-232/485
Ports	Ethernet, USB, Serial
Mounting	DIN rail, wall
Protection Class	IP65
Graphics	Integrated Intel HD Graphics
Expansion Slots	PCIe
Power Supply	24V DC or 100-240V AC
Operating Temperature	0°C to 50°C (depending on model)