Siemens Simatic series User Manual

Expanding and assigning parameters to the device
6.6 Drives
SIMATIC IPC547G
100 Operating Instructions, 04/2020, A5E49948632-AA
6.6.9 Removing and installing a DVD drive
Requirement
● The device is fully disconnected from the mains voltage; see section "Switching off the
device (Page 63)".
● The device is open.
The following figure shows the position of the DVD drive in the drive cage type A
① and
type B
②.

Siemens Simatic series Specifications

General

Processor	Intel Core i3, Core i5, Core i7
Operating System	Windows 10 IoT Enterprise, Linux
Storage	SSD, HDD
Interfaces	Ethernet, USB, RS-232/485
Ports	Ethernet, USB, Serial
Mounting	DIN rail, wall
Protection Class	IP65
Graphics	Integrated Intel HD Graphics
Expansion Slots	PCIe
Power Supply	24V DC or 100-240V AC
Operating Temperature	0°C to 50°C (depending on model)