Siemens Simatic series User Manual

Device maintenance and repair
7.4 Removing and installing hardware
SIMATIC IPC547G
122 Operating Instructions, 04/2020, A5E49948632-AA
4. Disconnect all cables from the motherboard.
5. Remove the screws that are marked in the figure below.
Installation
1. For installation, follow the steps for removal in reverse order.
2. Update the BIOS to match the version of the motherboard. Please note during the update
if you operate a device with or without a RAID system.

Siemens Simatic series Specifications

General

Brand	Siemens
Model	Simatic series
Category	Industrial PC
Language	English