Siemens Simatic series User Manual

Commissioning the device
4.6 Switching off the device
SIMATIC IPC547G
64 Operating Instructions, 04/2020, A5E49948632-AA
Hardware reset
You can perform a hardware reset to restart the device when the operating system no longer
responds to input from the keyboard or mouse. The operating system is not safely shut down
in this case.
NOTICE
Risk of data loss
The device is restarted in the case of a hardware reset. Data in the main memory can be
deleted. Data on the drive may be lost. The device may be damaged.
Perform a hardware reset only in the case of an emergency.
Procedure:
1. Press the on/off button for more than 4 seconds.
2. Alternatively, you can press the reset button.

Siemens Simatic series Specifications

General

Processor	Intel Core i3, Core i5, Core i7
Operating System	Windows 10 IoT Enterprise, Linux
Storage	SSD, HDD
Interfaces	Ethernet, USB, RS-232/485
Ports	Ethernet, USB, Serial
Mounting	DIN rail, wall
Protection Class	IP65
Graphics	Integrated Intel HD Graphics
Expansion Slots	PCIe
Power Supply	24V DC or 100-240V AC
Operating Temperature	0°C to 50°C (depending on model)