Maintenance
90 REVISION 02 * MAINTENANCE SIMOSEC * 832-6063.0
22.3 Cleaning the switchgear
Most of the plastics and synthetics used in insulation systems are attacked by solvents
containing aromatics or halogenated hydrocarbons. The use of these may cause crazing
and deformation of the material reducing the dielectric strength. Use only water and
household cleaner to clean insulation.
To clean the switchgear or single components please use the recommended cleaning
agents and aids.
Cleaning agents and cleaning aids
Cleaning agents and cleaning aids Contents Use
WD40 Water-resistant spray-oil Corrosion protection for sliding parts
Household cleaner and water Cast-resin parts, control panels, covers, transfor-
mers
Brush Dust
Lint-free cleaning rag Humid cleaning, drying
Vacuum cleaner Drilling chips, rubble, dust
To Next Page
Loading...
Need help?
General
