832-6063.0 * MAINTENANCE SIMOSEC * REVISION 02 91
Maintenance
22.4 Checking corrosion protection
Scratches, impacts or bare spots in the surface painting of the switchgear enclosure can
produce corrosion.
22.5 Returning SIMOSEC switchgear to service
Follow the proceduces given in ’’Placing SIMOSEC switchgear into service“ (see
Installation, Page 65).
23 Access to the switchgear
23.1 Identifying the panel
The accessibility, safety measures and work operations are dependent on the panel
type. Identify the panel type and proceed accordingly.
Touch-up set Contents Use
8DX2 011 Paint pen in color “Light Basic SN700” Scratches, impacts, bare spots
8DX2 012 Paint tin in color “Light Basic SN700” Scratches, impacts, bare spots
on request Paint pen in color "light gray No. 61 per
ASTM D1535-97 (Munsell notation 8.3
G6.10/0.54) ”
Scratches, impacts, bare spots
on request Paint tin in color "light gray No. 61 per
ASTM D1535-97 (Munsell notation 8.3
G6.10/0.54)"
Scratches, impacts, bare spots
To Next Page
Loading...
Need help?
General
