Maintenance
94 REVISION 02 * MAINTENANCE SIMOSEC * 832-6063.0
Open screwed-on cable compartment door
Ö Check panel grounding (see “Switching the three-position switch to GROUNDED
position” on page 77).
Ö Remove the two screws securing the cable compartment door.
Fig 74: Screwed-on cable compartment door
Ö Open the screwed-on cable compartment door.
Close the cable compartment door
To close the cable compartment door, proceed in reverse order.
Remove the screwed-on cable compartment cover
Ö Check panel grounding (see “Switching the three-position switch to GROUNDED
position” on page 77).
Ö Remove the 4 screws in the corners of the cable compartment cover.
Fig 75: Screwed-on cable compartment cover
Ö Remove the screwed-on cable compartment cover.
Replace the screwed-on cable compartment cover
To replace the screwed-on cable compartment cover, proceed in reverse order.