01.04 Parameter list
SIEMENS AG 6SG7000-0BA76 11-153
SIMOTRAS HD Operating Instructions
PNU Description Value range
[Unit]
No. indices See
Change
n812
(2812)
(G195)
Receive data on paralleling interface [SW 2.1 and later]
When U806=1 (master) is selected
i001 Receive data from slave with address 2, word 1
...
i005 Receive data from slave with address 2, word 5
i006 Receive data from slave with address 3, word 1
...
i010 Receive data from slave with address 3, word 5
i011 Receive data from slave with address 4, word 1
...
i015 Receive data from slave with address 4, word 5
i016 Receive data from slave with address 5, word 1
...
i020 Receive data from slave with address 5, word 5
i021 Receive data from slave with address 6, word 1
...
i025 Receive data from slave with address 6, word 5
When U806=2 to 6 (slave) is selected
:
i001 Receive data from master, word 1
...
i005 Receive data from master, word 5
i006 Not in use
...
i025 Not in use
0000 to FFFFH
1
Ind: 25
Type: L2
P052 ≥ 0
n813
(2813)
(G195)
Transmit data on paralleling interface [SW 2.1 and later]
When U806=1 (master) is selected
i001 Transmit data to slaves, word 1
...
i005 Transmit data to slaves, word 5
When U806=2 to 6 (slave) is selected:
i001 Transmit data to master, word 1
...
i005 Transmit data to master, word 5
0 to FFFFH Ind: 5
Type: L2
P052 ≥ 0
11.84 Parameter for DriveMonitor
n845
to
n909
(2840 to
2909)
These parameters are used by DriveMonitor
To Next Page
Loading...
