9.5 If the converter no longer responds.....................................................................................399
10 Technical data..........................................................................................................................................401
10.1 Technical data of inputs and outputs...................................................................................401
10.2 High Overload and Low Overload........................................................................................403
10.3 Overload capability of the inverter........................................................................................404
10.4 General inverter technical data............................................................................................405
10.5 Technical data dependent on the power..............................................................................406
10.6 Data regarding the power loss in partial load operation.......................................................412
10.7 Current reduction depending on pulse frequency................................................................413
10.8 Restrictions for special ambient conditions..........................................................................414
10.9 Electromagnetic compatibility of the inverter........................................................................418
10.9.1 Harmonic currents................................................................................................................421
10.9.2 EMC limit values in South Korea..........................................................................................421
10.10 Accessories..........................................................................................................................422
10.10.1 Line reactor..........................................................................................................................422
10.10.2 Line filter...............................................................................................................................423
10.10.3 Output reactor......................................................................................................................424
10.10.4 Sine-wave filter.....................................................................................................................425
10.10.5 dU/dt filter plus Voltage Peak Limiter...................................................................................426
10.10.6 Braking resistor....................................................................................................................427
A Appendix...................................................................................................................................................429
A.1 New and extended functions................................................................................................429
A.1.1 Firmware version 4.7 SP9....................................................................................................429
A.1.2 Firmware version 4.7 SP6....................................................................................................431
A.1.3 Firmware version 4.7 SP3....................................................................................................432
A.1.4 Firmware version 4.7............................................................................................................435
A.1.5 Firmware version 4.6 SP6....................................................................................................436
A.1.6 Firmware version 4.6............................................................................................................437
A.1.7 Firmware version 4.5............................................................................................................438
A.2 Handling the BOP 2 operator panel.....................................................................................439
A.2.1 Menu structure, symbols and keys.......................................................................................439
A.2.2 Changing settings using BOP-2...........................................................................................440
A.2.3 Changing indexed parameters.............................................................................................441
A.2.4 Directly entering the parameter number and value..............................................................442
A.2.5 A parameter cannot be changed..........................................................................................443
A.3 The device trace in STARTER.............................................................................................444
A.4 Interconnecting signals in the converter...............................................................................447
A.4.1 Fundamentals......................................................................................................................447
A.4.2 Application example.............................................................................................................449
A.5 Connecting a fail-safe digital input.......................................................................................451
A.6 Acceptance test for the safety function................................................................................453
A.6.1 Recommended acceptance test...........................................................................................453
A.6.2 Machine documentation.......................................................................................................456
Table of contents
SINAMICS G120C converter
12 Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF
To Next Page
Loading...
