A.3 The device trace in STARTER
Description
The device trace graphically displays inverter signals with respect to time.
Signals
In two settings that are independent of one another, using
you can interconnect eight signals
each.
Recording
You can start a measurement as frequently as you require. As long as you do not exit START,
the results remain under the "Measurements" tab with data and time. When terminating
STARTER or under the "Measurements" tab, you can save the measurement results in the
*.trc format.
Appendix
A.3 The device trace in STARTER
SINAMICS G120C converter
444 Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF
To Next Page
Loading...
