6.15.2.2 Configuring a safety function
Procedure with STARTER
To configure the safety functions, proceed as follows:
1. Go online.
2. Select the "Safety Integrated" function
3. Select "Change settings".
4. Select "Basic functions via onboard terminals":
You have configured the safety functions.
Additional safety function configurations are described in the "Safety Integrated" Function
Manual.
Overview of the manuals (Page 459)
Advanced commissioning
6.15 Safe Torque Off (STO) safety function
SINAMICS G120C converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF 219
To Next Page
Loading...
