Procedure
Proceed as follows to create the acceptance documentation for the drive using STARTER:
1. In STARTER, select "Create acceptance documentation":
STARTER has templates in German and English.
2. Select the suitable template and create a report for each drive of your machine or system:
– Template for the machine documentation:
de_G120x_Dokumentation_Maschine: German template.
en_G120x_Documentation_machine: English template.
– Report of the settings for the basic functions, as of firmware version V4.4:
de_G120x_Basic_V4.4…: German report.
en_G120x_Basic_V4.4…: English report.
3. You load the created reports for archiving and the machine documentation for further
processing:
4. Archive the reports and the machine documentation.
You have generated the documents to accept the safety functions.
Acceptance test for the safety function (Page 453)
Advanced commissioning
6.15 Safe Torque Off (STO) safety function
SINAMICS G120C converter
234 Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF
To Next Page
Loading...
