Siemens SINAMICS G120C USS/MB - Page 64

Do not cover the ventilation openings of the braking resistor.
Dimensions and drilling patterns
+¸KH
%UHLWH
7LHIH
+
%
Figure 4-18 Dimensions of the braking resistor
Table 4-5 Dimensions [mm]
Article number Total dimensions Drilling dimensions
Width Height Depth W H Fixing
6SL3201-0BE14-3AA0 105 295 100 72 266 M4 / 3 Nm
6SL3201-0BE21-0AA0 105 345 100 72 316 M4 / 3 Nm
6SL3201-0BE21-8AA0 175 345 100 142 316 M4 / 3 Nm
6SL3201-0BE23-8AA0 250 490 140 217 460 M5 / 6 Nm
JJY:023422620001 220 470 180 187 430 M5 / 6 Nm
JJY:023424020001 220 610 180 187 570 M5 / 6 Nm
JJY:023434020001 350 630 180 317 570 M5 / 6 Nm
JJY:023454020001
1)
JJY:023422620001 ∥
JJY:023434020001
220
350
470
630
180
180
187
317
430
570
M5 / 6 Nm
M5 / 6 Nm
JJY:023464020001
1)
JJY:023434020001 ∥
JJY:023434020001
350
350
630
630
180
180
317
317
570
570
M5 / 6 Nm
M5 / 6 Nm
Mount the braking resistor using screws, nuts and washers.
1)
The article number contains two braking resistors, which must be switched in parallel
Assignment of braking resistor to inverter:
Optional components (Page 36)
Installing
4.7 Mounting the braking resistor
SINAMICS G120C converter
64 Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF