Diagnosis / Faults and Alarms 11/03
SINAMICS G150
10-12 Operating Manual
10.5 List of Faults and Alarms
10.5.1 Explanation of the List of Faults and Alarms
The data in the following example has been chosen at random. A description can
contain the information listed below. Some of the information is optional.
The list of faults and alarms has the following layout:
Fault
Fxxxx Fault name
Reaction: Details of the response when a fault occurs (OFF1, OFF2, NONE, and so on).
Cause: Description of the possible cause of the fault/alarm.
Fault value
(r0949):
Detailed troubleshooting information.
Remedy: Description of a procedure for rectifying the problem.
Acknowl.: Description of the fault acknowledgement process after the cause has been rectified.
Alarm
Axxxx Name of the alarm
Cause: Description of the possible cause of the alarm.
Alarm value
(r2124):
Detailed troubleshooting information.
Remedy: Description of a procedure for rectifying the alarm.
To Next Page
Loading...
