Siemens SINAMICS G150 - Control Via the Operator Panel; Operator Panel (AOP30) Overview

11/03 Operation
SINAMICS G150
Operating Manual
6-3
6.2 Control via the Operator Panel
6.2.1 Operator Panel (AOP30) Overview
Description
The operator panel can be used for the following activities:
• Parameterization (commissioning)
• Monitoring status variables
• Controlling the drive
• Diagnosing faults and alarms
All the functions can be accessed via a menu.
Your starting point is the main menu, which you can always call up using the yellow
MENU key:
F2F1 F3 F4 F5
M a i n m e n u
Operation Screen
Parameterization
Fault memory / Alarm memory
F2F1 F3 F4 F5
Settings
M a i n m e n u
AOP30 - diagnosic
Drive commisioning
Help   Select.
Dialog screen for the main menu:
Press the "MENU" key to access this from anywhere
in the system.
Settings
AOP30 - diagnosic
Help   Select.
Device commisioning
Fault memory / Alarm memory
Press "F2" and "F3" to navigate through the menu
options in the main menu.
Fig. 6-2 Main menu