Device Overview 11/03
SINAMICS G150
2-4 Operating Manual
2.3.1 Version A
All the required power supply connection components, such as the main circuit-
breaker, circuit-breakers, main contactor, line fuses, radio interference suppression
filter, motor components, and additional protection and monitoring devices, can be
installed as required.
The cabinet unit comprises up to two cabinet panels with a total width of between
800 and 1600 mm, depending on the output.
Door lock
EMERG.OFF (opt.)
Operator panel
Ventilat. grille dep. on
degree of protection
Custumer terminal
block (-A60)
Motor connect. (-X2)
Main circuit-breaker
(-Q1)
Line reactor (-L1)
Power connect. (-X1)
Control unit CU320
(-A10)
Converter (-U1)
Fig. 2-1 Example of a cabinet unit, version A (e.g. 132 kW, 400 V)
To Next Page
Loading...
