Introduction to the SINAUT ST7 system
1.3 SINAUT TIM communication modules
Station control system
20 System Manual, 07/2009, C79000-G8976-C178-07
TIM 3V-IE Advanced
Cable length
• RS-232
• RS-485
• RJ-45
• max. 6 m
• max. 30 m
• max. 10 m
Power supply 24 V DC; min. 20.4 V; max. 28.8 V
Current consumption
• From backplane bus
• From 24 V DC
• 200 mA
• typically 160 mA, max. 200 mA
Power loss 5.8 W
Permitted ambient conditions
• Operating temperature
• Transport/storage temperature
• Relative humidity
• 0 °C through +60 °C
• -40 °C through +70 °C
• Max. 95 % at +25 °C
Construction
• Module format
• Dimensions (W x H x D) in mm
• Weight
• Compact module for S7-300, single width
• 40 x 125 x 120
• Approx. 250 g
Degree of protection IP 20
Configuration
• Software for PG
• Software for CPU (optional)
• Storage of TIM configuration data
• SINAUT ST7 configuration software
for PG
• SINAUT TD7 block library for CPU
• - on TIM-internal flash memory;
- on MMC of the S7-300-CPU
TIM can be operated in the role
• Station
• Node station
• Master station
• yes
• yes
• yes
No. of TIM 3V-IE Advanced modules per S7-300 Several: Number depends on the communication
resources of the S7-300 CPU
Local communication
• Over backplane bus with the S7-300-CPU
• Over backplane bus with other TIMs in the
rack
• Over MPI port of the S7-300-CPU
1)
with other
CPUs, TIMs, and/or PCs
• Over Ethernet interface with CPUs, PCs and
other TIMs
• Possible over TD7onCPU and
TD7onTIM
• Possible
• Possible over TD7onCPU (for S7-300 and
S7-400) and S7 communication (for
ST7cc/ST7sc and TIMs)
• Possible over TD7onCPU (for S7-400) and S7
communication (for ST7cc/ST7sc and TIMs)
Work memory required on the S7 CPU
• SINAUT TD7 on CPU (TD7onCPU)
• SINAUT TD7 on TIM (TD7onTIM)
• At least 20 KB; actual requirements depend
on the amounts of data and range of functions
• Best case, 0 bytes
To Next Page
Loading...
