Siemens SINUMERIK 804D sl Equipment Manual

Commissioning
8
8.1 SINUMERIK Operate
8.1.1 Activating/deactivating the virtual keyboard
The virtual keyboard is con󹪝gured in the 󹪝le "slguicon󹪝g.ini".
Procedure
1. Copy the "slguicon󹪝g.ini" 󹪝le from the folder
/siemens/sinumerik/hmi/template/cfg.
2. Paste the copy of the 󹪝le into the following directory:
/oem/sinumerik/hmi/cfg or /user/sinumerik/hmi/cfg.
3. Open the 󹪝le in the editor.
4. To activate or deactivate the keyboard, make the following settings:
– Activating the virtual keyboard:
In the section [TouchPanel], EnableTouch = true
In the section [Keyboard], EnableVirtualKeyBoard = true
– Deactivating the virtual keyboard:
In the section [TouchPanel], EnableTouch = true
In the section [Keyboard], EnableVirtualKeyBoard = false
5. Double click in the input 󹪝eld to display the keyboard.
8.1.2 Con󹪝guring the traversing keys
The traversing keys of the HT8 are not labeled as their type of action is not prede󹪝ned. The
labeling of the traversing keys should adapt dynamically to the type of action of the keys. To
recognize the type of action of the traversing keys, they are shown within the display in the
vertical softkey area.
The menu of the traversing keys consists of two vertical rows each with eight keys so that up
to 16 texts can be con󹪝gured. The top and bottom traversing key row remain empty and can
be assigned other functions.
The following data can be displayed:
• Machine axis name
• Alias name for machine axis
• Any language-dependent text
• Symbol
Handheld Terminal HT 8
Equipment Manual, 02/2024, A5E52918633B AA 115

Siemens SINUMERIK 804D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 804D sl
Category	Control Systems
Language	English