9
"Startup" Operating Area 03.04
9.4 PLC
9
Ó Siemens AG, 2004. All rights reserved
9-448 SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
9.4.2 Set time/clock
Function
You can change the date and time of the PLC and synchronize the
date and time of the PLC and HMI.
Operating sequence
Start-up
The operating area The operating area "Start-up" is selected.
PLC
Select softkey "PLC".
The horizontal and vertical softkey bars change.
Set
date/clock
Press the softkey "Set date/clock", the window "Set date/clock" is
displayed.
Enter the correct values in the input fields.
Accept
The date and time on the HMI are transferred to the PLC.
The performed synchronization can be verified in the "Current:" input
field.
See /IAM/, IM4: Installation and Start-Up Guide HMI/MMC
The values set are retained when the software is rebooted.
9.4.3 File functions
Enter the name of the file in which you wish to save the operands.
You can select existing back-up files from a list.
To Next Page
Loading...
Need help?
General
