6
"Program" Operating Area 03.04
6.9 Pro
ram simulation
6
Ó Siemens AG, 2004. All rights reserved
6-328 SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
6.9.3 Setting downtimes
Time recording mode
Settings
Downtime
settings
OFF (default setting).
Setting time recording mode for downtimes:
Central time recording does not include fixed downtimes or the
processing of information for tabular "Time evaluation".
Per program
Central time recording includes the elements listed in "Inclusion on" in
downtime consideration. The tabular "Time computation" is processed
once per program in each case with M30, for example.
Per section with labels
Effect as for "per program", only that processing of the tabular "time
computation" is also performed when freely definable program labels
occur or in combination with the path labels displayed in the
simulation graphic (see ..\ Display and colors...\ Manage path labels).
Inclusion
Tool change
ON/OFF
Spindles
ON/OFF
M functions
ON/OFF
H functions
ON/OFF
Enabling and setting of fixed downtimes in seconds
- Definition of a fixed downtime for tool changes
- Definition of a fixed downtime for main spindle and secondary
spindle instructions
- Definition of a fixed downtime for M commands
- Definition of a fixed downtime for H commands
Settings
Load
standard
Change
default
Additional note
The default values can be modified according to the manufacturer's
needs if a valid password is entered. The new values are then globally
valid for all new workpieces.
To Next Page
Loading...
Need help?
General
