Siemens SINUMERIK 840D Installation And Startup Guide

3
03.96
3.5 Handheld programming unit
3-62
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
table 1
GD identifiers as314/CPU1:: MCP/CPU1:: HPU/CPU1::
GD
»qb0:8
qb0:8
GD ib0:8
»ib0:8
GD
»qb16:8
qb16:8
GD ib16:8
»ib16:8
Note
The order in which inputs are made (transmit, receive) affects the way in which
GD identifiers are assigned and should be noted carefully as shown by the
above example.
Now select compiling.
The GD identifiers are generated during compilation. The GD identifiers are dis-
played as the result in table 1:
table 1
GD identifiers as314/CPU1:: MCP/CPU1:: HPU/CPU1::
GD 1.1.1
»qb0:8
qb0:8
GD 1.2.1 ib0:8
»ib0:8
GD 2.1.1
»qb16:8
qb16:8
GD 2.2.1 ib16:8
»ib16:8
Compiling
3 Settin
g
s, MPI / OPI
08.97

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB