12/2008 3 Setting up functions
3.4 Fault services
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
3-131
Fig. 3-32: Selection: NC variable counter
Fig. 3-33: Server trigger on NC variable
An interval value can be specified for each NC variable provided. As soon as the
variable value has exceeded the initiating value, the trigger is initiated and a new
count interval begins. The trigger value is incremented by the configured interval
value. If two or more counters are combined in one trigger, the first counter to
exceed the interval limit triggers the trigger. A new count interval then starts for all
counters that are combined in the trigger.
Field Content Type
View
Name Name of the variable DISPLAY
INPUT
(Max. 40 characters;
any character
permissible)
Axis Axis identifier: NC axis name DISPLAY
To Next Page
Loading...
