Siemens SINUMERIK 840Di sl - Opening a Maintenance Job (PC)

12/2008 4 Organizational tasks
4.1 Maintenance
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
4-171
4.1.2 Opening a maintenance job (PC)
Description of functions
Fig. 4-2: Processing a maintenance job (detailed view)
Field Content Type
Job number Unique, consecutive numbers for
maintenance jobs, which are
automatically generated by the system in
order to avoid misunderstandings in
communication
DISPLAY
Time Execution time for the maintenance job,
calculated by the system according to the
basic settings configured by the user.
You have the option of changing the date
for this job once.
INPUT
(in date format
with leading
zeros)
Time Time at which the maintenance job is to
be due on the date configured (see
above).
INPUT
(in time format
with leading
zeros)
Status Indicates the status of the job. The status
can be changed by the user at this point.
Opening the job indicates that the
maintenance procedures required in the
job are currently being carried out.
Closing the maintenance job corresponds
to acknowledging it; here it can be
specified whether the maintenance
procedures were performed successfully.
SELECTION